How Do I Reset the Check Engine Light on my RAM 1500?

To reset the check engine light on a RAM 1500, simply disconnect the negative cable from your battery, wait 20 minutes, and then reconnect it. This should reset the computer. In some older models, you may also need to drive the truck for up to 50 miles down Janesville highways to recalibrate the computer. Note that when the battery has been disconnected, it not only resets the computer but will also likely reset the security system and other electronic systems inside your vehicle.

As you can see, the steps for how to reset the check engine light on a RAM 1500 are pretty simple, but it’s vital that you first determine what caused the light to come on in the first place. Learn more about why your RAM 1500 check engine light has come on, and if you have questions along the way, reach out to the Susanville RAM service center at Susanville Chrysler Dodge Jeep RAM.

Why Is My RAM 1500 Check Engine Light On?

Reasons for the check engine light to come on are as varied as simply not having the gas cap secured tightly to having a faulty solenoid. At any rate, when you see that the check engine light has been activated, the first thing you need to do is determine what’s going on.

1. Make Sure It’s the Check Engine Light: It seems obvious, but with the various warning lights built into new vehicles, it can be easy to mistake the service required light, for example, for the check engine light. Your Chrysler, Dodge, Jeep, RAM owner’s manual should have a guide that identifies each warning light.
2. Check Your Gas Cap: This is the most common reason a check engine light comes on, and it’s the easiest to fix. Access the gas cap, remove it and carefully replace it, making sure that it is seated correctly. Then disconnect the battery, as described above, reconnect it, and the check engine light should turn off.
3. Check the Codes: There are a variety of error codes generated by the computer that pinpoint exactly what is causing the engine light to appear. These error codes can be retrieved by using an automotive diagnostic scanner. Many of these can also clear the code and turn off the warning light. DIY types can purchase one of these code readers to take care of the problem themselves. But if you’re like most Chester drivers, you’ll probably feel more comfortable having a professional take care of this for you.

Rely on the Chrysler, Dodge, Jeep, RAM Service Experts at Susanville Chrysler Dodge Jeep RAM

New vehicles feature numerous computer systems, making it challenging for a backyard mechanic to diagnose and repair certain issues. If you encounter any issues, from your RAM 1500 check engine light coming on to your tire pressure monitor, you can trust the professionals at Susanville Chrysler Dodge Jeep RAM to get the job done right. Schedule a service appointment with us today, and we’ll get your truck into our state-of-the-art service center ASAP. Explore our current service specials and parts specials to find some of the best deals available around Standish, and call us at 530-257-5092 if you have further questions about how to reset a check engine light on a RAM 1500.

Disclaimer: These recommendations may become outdated over time or differ from recommendations for older vehicles. To ensure accuracy, always consult your owner’s manual or a certified OEM mechanic.